From: "Матыскин Алексей" <matiskyn@mail.ru> To: ALT Linux Community general discussions <community@lists.altlinux.org> Subject: [Comm] bluetooth samsung sgh-e200 проблемы Date: Sat, 10 Nov 2007 18:14:55 +0700 Message-ID: <200711101814.56079.matiskyn@mail.ru> (raw) [-- Attachment #1: Type: text/plain, Size: 499 bytes --] Altlinux Desktop 4.0 kdebluetooth-1.0-alt8.beta3 gnome-bluetooth-0.8.0-alt1 libkbluetooth-1.0-alt8.beta3 obexftp-0.22-alt1.pre4 libobexftp-0.22-alt1.pre4 libopenobex-1.3-alt1 сотовый телефон samsung sgh-e200 Проблема: получается настроить соединение только с телефона на компьютер, а хочется в обе стороны. конфигурационные файлы и вывод sdptool во вложениях [-- Attachment #2: hcid.conf --] [-- Type: text/x-java, Size: 1874 bytes --] # # HCI daemon configuration file. # # HCId options options { # Automatically initialize new devices autoinit yes; # Security Manager mode # none - Security manager disabled # auto - Use local PIN for incoming connections # user - Always ask user for a PIN # security user; # Pairing mode # none - Pairing disabled # multi - Allow pairing with already paired devices # once - Pair once and deny successive attempts pairing multi; # Default PIN code for incoming connections passkey "1111"; } # Default settings for HCI devices device { # Local device name # %d - device id # %h - host name name "%h-%d"; # Local device class # e.g. # 0xsss100 = Computer 0xsss104 = Computer Desktop # 0xsss108 = Computer Server # 0xsss10c = Computer Laptop # The 'sss' above defines the service-class (not quite, only the # first 11 bits, the next 11 define the device-class, then 2 format bits.) # See http://www.bluetooth.org/assigned-numbers/baseband.htm # for more information. 0x100bbb stands for "Object Transfer (v-Inbox, v-Folder, ...)" 0x020bbb stands for "Networking (LAN, Ad hoc, ...)" # Services: Telephony, Audio, Object Transfer, Capturing, Rendering, Networking # Major device class: Computer # Minor device class: Desktop workstation class 0x5e0104; # Default packet type pkt_type DH1,DM1,HV1; # Inquiry and Page scan iscan enable; discovto 0; pscan enable; # Default link mode # none - no specific policy # accept - always accept incoming connections # master - become master on incoming connections, # deny role switch on outgoing connections lm accept; # Default link policy # none - no specific policy # rswitch - allow role switch # hold - allow hold mode # sniff - allow sniff mode # park - allow park mode lp rswitch,hold,sniff,park; } [-- Attachment #3: rfcomm.conf --] [-- Type: text/plain, Size: 453 bytes --] # # RFCOMM configuration file. # rfcomm0 { # # Automatically bind the device at startup bind yes; # # # Bluetooth address of the device device 00:1D:F6:82:DC:81; # # # RFCOMM channel for the connection channel 6; # # # Description of the connection comment "OBEX File Transfer"; } rfcomm1 { bind yes; device 00:1D:F6:82:DC:81; channel 2; comment "serial port"; } rfcomm2 { bind yes device 00:1D:F6:82:DC:81; channel 7; comment "OBEX Object Push" } [-- Attachment #4: sdp.txt --] [-- Type: text/plain, Size: 2609 bytes --] Inquiring ... Browsing 00:1D:F6:82:DC:81 ... Service Name: WBTEXT Service RecHandle: 0x10000 Service Class ID List: UUID 128: db1d8f12-95f3-402c-9b97-bc504c9a55c4 Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 1 Language Base Attr List: code_ISO639: 0x656e encoding: 0x6a base_offset: 0x100 Profile Descriptor List: "" (0x1cdb1d8f-1295-f340-2c9b-97bc504c9a55) Version: 0x0100 Service Name: Serial Port Service RecHandle: 0x10001 Service Class ID List: "Serial Port" (0x1101) Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 2 Profile Descriptor List: "Serial Port" (0x1101) Version: 0x0100 Service Name: Dial-up Networking Service RecHandle: 0x10002 Service Class ID List: "Dialup Networking" (0x1103) Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 3 Profile Descriptor List: "Dialup Networking" (0x1103) Version: 0x0100 Service Name: Voice GW Service RecHandle: 0x10003 Service Class ID List: "Headset Audio Gateway" (0x1112) "Generic Audio" (0x1203) Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 4 Profile Descriptor List: "Headset" (0x1108) Version: 0x0100 Service Name: Voice GW Service RecHandle: 0x10004 Service Class ID List: "Handfree Audio Gateway" (0x111f) "Generic Audio" (0x1203) Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 5 Profile Descriptor List: "Handsfree" (0x111e) Version: 0x0105 Service Name: Advanced audio source Service RecHandle: 0x10005 Service Class ID List: "Audio Source" (0x110a) Protocol Descriptor List: "L2CAP" (0x0100) PSM: 25 "AVDTP" (0x0019) uint16: 0x100 Profile Descriptor List: "Advanced Audio" (0x110d) Version: 0x0100 Service RecHandle: 0x10006 Service Class ID List: "AV Remote Target" (0x110c) Protocol Descriptor List: "L2CAP" (0x0100) PSM: 23 "AVCTP" (0x0017) uint16: 0x100 Profile Descriptor List: "AV Remote" (0x110e) Version: 0x0100 Service Name: OBEX File Transfer Service RecHandle: 0x10007 Service Class ID List: "OBEX File Transfer" (0x1106) Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 6 "OBEX" (0x0008) Profile Descriptor List: "OBEX File Transfer" (0x1106) Version: 0x0100 Service Name: Object Push Service RecHandle: 0x10008 Service Class ID List: "OBEX Object Push" (0x1105) Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 7 "OBEX" (0x0008) Profile Descriptor List: "OBEX Object Push" (0x1105) Version: 0x0100
next reply other threads:[~2007-11-10 11:14 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2007-11-10 11:14 Матыскин Алексей [this message] 2007-11-10 12:30 ` Andrey Rahmatullin
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200711101814.56079.matiskyn@mail.ru \ --to=matiskyn@mail.ru \ --cc=community@lists.altlinux.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
ALT Linux Community general discussions This inbox may be cloned and mirrored by anyone: git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 community community/ http://lore.altlinux.org/community \ mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com public-inbox-index community Example config snippet for mirrors. Newsgroup available over NNTP: nntp://lore.altlinux.org/org.altlinux.lists.community AGPL code for this site: git clone https://public-inbox.org/public-inbox.git