From: Michael Shigorin <mike@osdn.org.ua>
To: ALT Linux Community general discussions <community@lists.altlinux.org>
Subject: Re: [Comm] ALD4 Проблема с Eth0
Date: Fri, 5 Oct 2007 20:28:45 +0300
Message-ID: <20071005172845.GL22309@osdn.org.ua> (raw)
In-Reply-To: <46FBDB9C.5020201@gmail.com>
On Thu, Sep 27, 2007 at 08:34:36PM +0400, Mike Shuvalov wrote:
> >>Обновил систему и появились тормоза на eth0. Пинги до соседней
> >>машины принимают фантастические значения:
> >>Что где нужно подкрутить, что бы вылечить это дело?
> >Покажите dmesg и /proc/interrupts? (возможно, поможет загрузка
> >с pci=noacpi или заклинания из той же оперы)
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
> report
Вот это ещё попробуйте на всякий, хотя поможет вряд ли.
> ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:03:00.0 to 64
> eth0: Identified chip type is 'RTL8168B/8111B'.
> eth0: r10001.05, the Linux device driver for Realtek Ethernet
> Controllers at 0xa000, 00:1a:4d:20:d8:ae, IRQ 177
> Realtek RTL8168/8111 Family PCI-E Gigabit Ethernet Network Adapter
> Driver version:1.05
> Released date:2006/10/25
> Link Status:Linked
> Link Speed:100Mbps
> Duplex mode:Full-Duplex
> I/O Base:0xA000(I/O port)
> IRQ:177
Посмотрите в lsmod, какой из драйверов r1000/r8169/r8168
загрузился -- по слухам, работает обычно один из них, а вот
оба остальных придётся занести в блэклист
(/etc/modprobe.d/blacklist).
--
---- WBR, Michael Shigorin <mike@altlinux.ru>
------ Linux.Kiev http://www.linux.kiev.ua/
---- Oct 26--27, Kiev, Ukraine:
-- http://conference.osdn.org.ua
prev parent reply other threads:[~2007-10-05 17:28 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-09-26 18:20 Mike Shuvalov
2007-09-26 18:33 ` Michael Shigorin
2007-09-27 16:34 ` Mike Shuvalov
2007-10-05 17:28 ` Michael Shigorin [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20071005172845.GL22309@osdn.org.ua \
--to=mike@osdn.org.ua \
--cc=community@lists.altlinux.org \
--cc=shigorin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
ALT Linux Community general discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
public-inbox-index community
Example config snippet for mirrors.
Newsgroup available over NNTP:
nntp://lore.altlinux.org/org.altlinux.lists.community
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git