[Comm] Настройка wvdial

[sinom <sinom@ktk.ru>]

[-- Attachment #1: Type: text/plain, Size: 300 bytes --]

Доброго времени суток!
Не могу настроить wvdial. Создал с помощью wvdialconf конфиг (приложил к 
письму). Пытаюсь дозвониться а оно выводит вот такой лог (приложил к письму). 
У провайдера авторизация CHAP... Чувствую, что собака порылась именно в 
этом... Но что делать не знаю. КАК?
--
Роман







[-- Attachment #2: wvdial.log --]
[-- Type: text/x-log, Size: 1249 bytes --]

[root@localhost root]# wvdial --config .wvdial.conf
--> WvDial: Internet dialer version 1.53
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Sending: ATDP661311
--> Waiting for carrier.
ATDP661311
CONNECT 115200
--> Carrier detected.  Waiting for prompt.
gts2 line 11
User Access Verification
Login:
--> Looks like a login prompt.
--> Sending: sinom
sinom
Password:
--> Looks like a password prompt.
--> Sending: (password)
*** User sinom: total time left 64 minutes, left for today unlimited minutes.
Entering PPP routing mode.
Async interface address is unnumbered (Ethernet0)
Your IP address is 80.253.224.29. MTU is 1500 bytes
Header compression is on.
~
--> Looks like a welcome message.
--> Starting pppd at Mon May 12 22:21:49 2003
--> pid of pppd: 3259
--> Disconnecting at Mon May 12 22:21:51 2003
--> The PPP daemon has died: A modem hung up the phone (exit code = 16)
--> man pppd explains pppd error codes in more detail.
--> Try again and look into /var/log/messages and the wvdial and pppd man pages for more information.
--> Auto Reconnect will be attempted in 5 seconds
--> Initializing modem.
--> Sending: ATZ
NO CARRIER

[-- Attachment #3: .wvdial.conf --]
[-- Type: text/plain, Size: 192 bytes --]

[Dialer Defaults]
Modem = /dev/modem
Baud = 115200
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ISDN = 0
Modem Type = Analog Modem
Phone = 661311
Username = sinom
Password = password