From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Date: Mon, 11 Nov 2002 09:44:05 +0300 From: Alexey Tourbin To: community@altlinux.ru Message-ID: <20021111064405.GA1950@homestead.turbinal.org> Mail-Followup-To: community@altlinux.ru Mime-Version: 1.0 Content-Type: multipart/signed; micalg=pgp-sha1; protocol="application/pgp-signature"; boundary="SLDf9lqlvOQaIe6s" Content-Disposition: inline Subject: [Comm] dist-upgrade => hdd crash Sender: community-admin@altlinux.ru Errors-To: community-admin@altlinux.ru X-BeenThere: community@altlinux.ru X-Mailman-Version: 2.0.9 Precedence: bulk Reply-To: community@altlinux.ru List-Unsubscribe: , List-Id: List-Post: List-Help: List-Subscribe: , List-Archive: Archived-At: List-Archive: List-Post: --SLDf9lqlvOQaIe6s Content-Type: text/plain; charset=koi8-r Content-Disposition: inline Content-Transfer-Encoding: 8bit После dist-upgrade: машина не грузится (grub). Grub по каким-то причинам устаровился некорректно. Ладно, грузимся с дискетки, получается это примерно с третьего раза, т.к. не можем замонтировать корневой раздел (reiserfs) с вот такой вот руганью: hdb: dma_intr: status=0x51<4> { DriveReady SeekComplete Error } hdb: dma_intr: error=0x01<4> { AddrMarkNotFound }, LBAsect=207, sector=144 hdb: read_intr: status=0x59<4> { DriveReady SeekComplete DataRequest Error } hdb: read_intr: error=0x40<4> { UncorrectableError }, LBAsect=207, sector=144 Пробую переустановить grub: похожая ругань (про Seek), и машина повисает. Боюсь, что это конец винту. Мне интересен любой комментарий. А главное, что мне теперь делать. Даже перезагружаться боюсь. Полный dmesg: Linux version 2.4.18-alt6master-up (goldhead@mash.office.altlinux.ru) (gcc version 2.96 20000731 (ALT Linux, build 2.96-ipl15mdk)) #1 Tue Apr 16 14:50:56 MSD 2002 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000008000000 (usable) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) On node 0 totalpages: 32768 zone(0): 4096 pages. zone(1): 28672 pages. zone(2): 0 pages. Local APIC disabled by BIOS -- reenabling. Found and enabled local APIC! Building zonelist for node : 0 Kernel command line: BOOT_IMAGE=linux root=341 Initializing CPU#0 Detected 334.093 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 666.82 BogoMIPS Memory: 126196k/131072k available (916k kernel code, 4488k reserved, 268k data, 752k init, 0k highmem) Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes) Inode-cache hash table entries: 8192 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes) Page-cache hash table entries: 32768 (order: 5, 131072 bytes) CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 128K CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 CPU: Common caps: 0183fbff 00000000 00000000 00000000 CPU: Intel Celeron (Mendocino) stepping 00 Enabling fast FPU save and restore... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au) mtrr: detected mtrr type: Intel PCI: PCI BIOS revision 2.10 entry at 0xfb460, last bus=1 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 Limiting direct PCI/PCI transfers. Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd VFS: Diskquotas version dquot_6.5.1 initialized pty: 256 Unix98 ptys configured block: 256 slots per queue, batch=64 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hdb: C/H/S=0/0/0 from BIOS ignored hdb: FUJITSU MPE3136AT, ATA DISK drive hdd: Pioneer CD-ROM ATAPI Model DR-A12X 0100, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 blk: queue 8032b7cc, I/O limit 4095Mb (mask 0xffffffff) hdb: 26688576 sectors (13665 MB) w/512KiB Cache, CHS=26476/16/63, UDMA(33) Partition check: hdb: [PTBL] [1661/255/63] hdb1 hdb2 NET4: Frame Diverter 0.46 Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994 Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak. md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 1024 buckets, 8Kbytes TCP: Hash tables configured (established 8192 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NET4: AppleTalk 0.18a for Linux NET4.0 RAMDISK: Compressed image found at block 0 Uncompressing.....done. Freeing initrd memory: 128k freed VFS: Mounted root (ext2 filesystem). reiserfs: checking transaction log (device 03:41) ... Warning, log replay starting on readonly filesystem hdb: dma_intr: status=0x51<4> { DriveReady SeekComplete Error } hdb: dma_intr: error=0x01<4> { AddrMarkNotFound }, LBAsect=207, sector=144 hdb: dma_intr: status=0x51<4> { DriveReady SeekComplete Error } hdb: dma_intr: error=0x01<4> { AddrMarkNotFound }, LBAsect=207, sector=144 hdb: dma_intr: status=0x51<4> { DriveReady SeekComplete Error } hdb: dma_intr: error=0x01<4> { AddrMarkNotFound }, LBAsect=207, sector=144 hdb: dma_intr: status=0x51<4> { DriveReady SeekComplete Error } hdb: dma_intr: error=0x01<4> { AddrMarkNotFound }, LBAsect=207, sector=144 hdb: DMA disabled ide0: reset: master: error (0x00?) hdb: read_intr: status=0x59<4> { DriveReady SeekComplete DataRequest Error } hdb: read_intr: error=0x40<4> { UncorrectableError }, LBAsect=207, sector=144 end_request: I/O error, dev 03:41 (hdb), sector 144 reiserfs: replayed 36 transactions in 55 seconds Using r5 hash to sort names ReiserFS version 3.6.25 VFS: Mounted root (reiserfs filesystem) readonly. change_root: old root has d_count=2 Trying to unmount old root ... okay Freeing unused kernel memory: 752k freed Executing init=/sbin/init Real Time Clock Driver v1.10e Adding Swap: 337356k swap-space (priority -1) hdd: set_drive_speed_status: status=0x00<4> { } hdd: ATAPI 12X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.12 hdd: drive_cmd: status=0x00<4> { } hdd: drive_cmd: status=0x01<4> { Error } hdd: drive_cmd: error=0x04 cryptoapi: loaded loop: loaded (max 8 devices) cryptoloop: loaded rivafb: RIVA MTRR set to ON Console: switching to colour frame buffer device 80x30 rivafb: PCI nVidia NV3 framebuffer ver 0.9.2a (RIVA-128, 8MB @ 0xE3000000) usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 15:15:01 Apr 16 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 10 for device 00:07.2 usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 10 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver isapnp: Scanning for PnP cards... isapnp: Card 'U.S. Robotics Sportster 33600 FAX/Voice Int' isapnp: 1 Plug & Play card detected total Serial driver version 5.05c-ml (2001-11-27) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at port 0x02f8 (irq = 3) is a 16550A parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE] parport0: irq 7 detected inserting floppy driver for 2.4.18-alt6master-up Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 divert: not allocating divert_blk for non-ethernet device irlan0 PCI: Found IRQ 11 for device 00:09.0 cryptoapi: trying cipher-blowfish-cbc cryptoapi: trying cipher-blowfish cryptoapi: Registered blowfish-ecb (0) cryptoapi: Registered blowfish-cbc (65536) VFS: Can't find ext2 filesystem on dev loop(7,0). EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended -- Exit Music (for a Film) / OK Computer / Radiohead --SLDf9lqlvOQaIe6s Content-Type: application/pgp-signature Content-Disposition: inline -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQE9z1G1DhJH5ZpJBTARAq5CAKCG8Fo6kLnYf5Ei6m1zehalS3sGXACgnDxX bcI5COjDrZlDelE34d6LqZ0= =fXzT -----END PGP SIGNATURE----- --SLDf9lqlvOQaIe6s--