ALT Linux Community general discussions
 help / color / mirror / Atom feed
From: demiurg888@mail.ru
To: "Лааз Вадим" <community@altlinux.ru>
Subject: Re[2]: [Comm] Драйвер intel 82845g
Date: Wed, 29 Sep 2004 19:53:13 +0400
Message-ID: <1517174946.20040929195313@mail.ru> (raw)
In-Reply-To: <002401c4a616$3ef6a7a0$03821a0a@corp.zh>

Смиренно приветствую,  Лааз!

Вот  конфиг  моего  xfree  это  правда уже из Master 2.4 но в мастере 2.2 он был
точно таким же...


# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

Section "Files"

    RgbPath     "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

    # This  allows  the  server  to start up even if the
    # mouse device can't be opened/initialised.
    AllowMouseOpenFail

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "InputDevice"

    Identifier "Keyboard1"
    Driver      "Keyboard"
    Option "AutoRepeat"  "250 30"

    Option "XkbRules" "xfree86"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us,ru"
    Option "XkbVariant"  ",winkeys"
    Option "XkbOptions"  "grp:ctrl_shift_toggle"

EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "InputDevice"

    Identifier  "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "IMPS/2"
    Option "Device"      "/dev/psaux"
    Option "ZAxisMapping" "4 5"
#    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"

# ChordMiddle is an option for some 3-button Logitech mice

#    Option "ChordMiddle"

EndSection

Section "InputDevice"
        Identifier      "touchscreen[1]"
        Driver  "tsharc"
        Option  "Device"        "/dev/ttyS1"
        Option  "TSHARCBaud"    "9600"
        Option  "TSHARCType"    "12"
        Option  "TSHARCPS2"     "0"
        Option  "TSHARCBUS"     "0"
        Option  "ScreenNumber"  "0"
        Option  "ButtonNumber"  "1"
        Option  "AlwaysCore"
EndSection


Section "Module"

# This loads the DBE extension module.

    Load        "dbe"

    Load        "/usr/X11R6/lib/modules/extensions/libglx.a"
    Load        "dri"


# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.

    SubSection  "extmod"
        #Option "omit xfree86-dga"

    EndSubSection


# This loads the Type1 and FreeType font modules

    Load        "type1"
    Load        "freetype"
EndSection


Section "DRI"
    Mode        0666
EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present

Section "Monitor"
    Identifier "monitor1"
    VendorName "Unknown"
    ModelName  "Unknown"


# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync  30-76


# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY.  REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 49-76


# This is a set of extended mode timings typically used for laptop,
# TV fullscreen mode or DVD fullscreen output.
# These are available along with standard mode timings.

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480"    65.00 1024 1032 1176 1344   480  488  494  563 -hsync -vsync

# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616


EndSection



# **********************************************************************
# Graphics device section
# **********************************************************************

Section "Device"
    Identifier "Generic VGA"
    Driver     "vga"
EndSection

Section "Device"
    Identifier  "Intel 845"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Driver      "i810"
#    VideoRam    4096
       Option "XaaNoOffScreenPixmaps"
    # Clock lines


    # Uncomment following option if you see a big white block        
    # instead of the cursor!                                          
    #    Option      "sw_cursor"

    Option      "AGPMode"  "1"
    Option      "DPMS"  "on"
EndSection



# **********************************************************************
# Screen sections
# **********************************************************************


Section "Screen"
    Identifier "screen1"
    Device      "Intel 845"
    Monitor     "monitor1"
    DefaultColorDepth 16
    Subsection "Display"
        Depth       8
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       15
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "1024x768" "800x600" "640x480"
        ViewPort    0 0
    EndSubsection
EndSection


Section "ServerLayout"
    Identifier "layout1"
    Screen     "screen1"

InputDevice "touchscreen[1]" "AlwaysCore"
    InputDevice "Mouse1" "CorePointer"

    InputDevice "Keyboard1" "CoreKeyboard"
EndSection



-- 
Искренне с уважением,
                    Сергей                             mailto:demiurg888@mail.ru



  parent reply	other threads:[~2004-09-29 15:53 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-09-28 12:04 Лааз Вадим
2004-09-28 12:44 ` demiurg888
2004-09-28 12:55   ` Andrey Rahmatullin
2004-09-28 12:56   ` Лааз Вадим
2004-09-28 14:48     ` Re[2]: " demiurg888
2004-09-29 11:19 ` Лааз Вадим
2004-09-29 11:25   ` Genix
2004-09-29 11:35   ` Alex Gorbachenko
2004-09-29 15:53   ` demiurg888 [this message]
2004-10-01 21:14 ` [Comm] " Michael Shigorin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1517174946.20040929195313@mail.ru \
    --to=demiurg888@mail.ru \
    --cc=community@altlinux.ru \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

ALT Linux Community general discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror http://lore.altlinux.org/community/0 community/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 community community/ http://lore.altlinux.org/community \
		mandrake-russian@linuxteam.iplabs.ru community@lists.altlinux.org community@lists.altlinux.ru community@lists.altlinux.com
	public-inbox-index community

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://lore.altlinux.org/org.altlinux.lists.community


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git